On-Vehicle Inspection

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE IG1 RELAY
1. Remove the IG1 relay from the instrument panel junction block.

INSPECT RELAY

Measure resistance of the IG1 relay.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection	Specified Condition
3-5	10 kΩ or higher
3-5	Below 1 Ω (when battery voltage Is applied to terminals 1 and 2)

If the result is not as specified, replace the relay.

Fig 1: Identifying IG1 Relay Terminals