FixVault
Home › Toyota › 2007 › RAV4 Base, 2.4 D, FWD › Repair and Diagnosis › Engine Performance › Fuel Delivery › Engine Fuel System (2AZ-FE) › Fuel Tank › Reassembly

Fuel Tank: Reassembly

  1. INSTALL FUEL SENDER GAUGE ASSEMBLY 
    1. Install the sender gauge with the 5 bolts.

      Torque: 1.5 N.m (15 kgf.cm, 13 in.lbf) 

      Fig 1: Installing Sender Gauge With Bolts
      G04485506Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 FUEL TANK CUSHION 
    1. Install 7 new fuel tank cushions onto the fuel tank as shown in the illustration.
      Fig 2: Installing Fuel Tank Cushions Onto Fuel Tank
      G04485507Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 1 FUEL TUBE CLAMP 
    1. Install the 4 tube clamps to the fuel tank.
  4. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY 
    1. Install the tube with the 4 clips.
      Fig 3: Installing Tube With Clips
      G04485508Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL FUEL SUCTION WITH PUMP ASSEMBLY (See appropriate step(s) under  INSTALLATION  ) 
  6. INSTALL FUEL TANK VENT TUBE SET PLATE (See appropriate step(s) under  INSTALLATION  ) 
  7. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY (See appropriate step(s) under  INSTALLATION  ) 
About FixVault