Crankshaft Position Sensor: Removal
- DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM (see REPLACEMENT )
- DRAIN ENGINE COOLANT (see REPLACEMENT )
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE RADIATOR ASSEMBLY
- Remove the radiator assembly (See REMOVAL ).
- REMOVE FAN AND GENERATOR V BELT (see REMOVAL )
- DISCONNECT COMPRESSOR WITH PULLEY ASSEMBLY (see REMOVAL )
- REMOVE CRANKSHAFT POSITION SENSOR
- Disconnect the sensor connector.
- Remove the bolt and sensor.