Fuel Tank: Reassembly

INSTALL FUEL SENDER GAUGE ASSEMBLY
1. Install the sender gauge with the 5 screws.
  Torque: 1.5 N*m (15 kgf*cm, 13 in.*lbf)
  
  Fig 1: Installing Sender Gauge With Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 FUEL TANK CUSHION
1. Install 7 new fuel tank cushions onto the fuel tank as shown in the illustration.
  
  Fig 2: Installing Fuel Tank Cushions Onto Fuel Tank
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 FUEL TUBE CLAMP
1. Install the 4 tube clamps to the fuel tank.
INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY
1. Install the tube to the 4 fuel tube clamps (see Fig 3).
INSTALL FUEL SUCTION WITH PUMP ASSEMBLY (See appropriates step(s) under INSTALLATION )
INSTALL FUEL TANK VENT TUBE SET PLATE (See INSTALLATION )
CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (See INSTALLATION )

Fig 3: Installing Tube To Fuel Tube Clamps
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002