FixVault
Home › Toyota › 2007 › RAV4 Base, 3.5 K, AWD › Repair and Diagnosis › External Pages › Different car › Section 470 (Smart Key System (For Entry Function) (Diagnostics - Introduction)) › Smart Key System (For Entry Function) › DTC Check / Clear › DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2010 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
    5. Clear the DTCs.
About FixVault