FixVault
Home › Toyota › 2007 › Sequoia Limited, RWD › Repair and Diagnosis › Engine Performance › Engine Control System (2UZ-FE) › Camshaft Position Sensor › Removal

Camshaft Position Sensor: Removal

  1. DRAIN ENGINE COOLANT 
  2. REMOVE DRIVE BELT 

    (See REMOVAL )

  3. REMOVE NO. 3 TIMING BELT COVER LH 

    (See REMOVAL )

  4. REMOVE CAMSHAFT POSITION SENSOR 

    Remove the bolt, stud bolt and camshaft position sensor.

    Fig 1: Locating Camshaft Position Sensor With Bolt And Stud Bolt
    G05190645Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault