FixVault
Home › Toyota › 2007 › Sequoia Limited, RWD › Repair and Diagnosis › Engine Performance › Ignition System › Engine Ignition System › Ignition Coil › Removal

Ignition Coil: Removal

  1. DISCONNECT IGNITION COIL (WITH IGNITER) CONNECTORS 
  2. REMOVE IGNITION COILS (WITH IGNITER) 
    1. Remove the bolt, and pull out the ignition coil (with igniter). Remove the 8 ignition coils (with igniter).
      Fig 1: Removing Bolt Pulling Out Ignition Coil (With Igniter)
      G04507674Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault