Rear Upper Control Arm: Removal

Torque: 110 N*m (1, 150 kgf*cm, 83 ft.*lbf) 

1. Disconnect the speed sensor wire harness.
2. Remove the bolt and brake line bracket.

   Torque: 28 N*m (286 kgf*cm, 21 ft.*lbf) 

3. Remove the 2 nuts, washers, bolts and upper control arm.

   Torque: 140 N*m (1, 428 kgf*cm, 103 ft.*lbf) 

   HINT:

   At the time of installation, after stabilizing the suspension, torque the nuts.

   Fig 1: Removing Upper Control Arm Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002