Inspection Procedure
- CHECK DTC
- Check if DTC B1234 of the multiplex communication system is output.
OK: DTC is not output
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
NG: GO TO NEXT STEP
- Check if DTC B1234 of the multiplex communication system is output.
- INSPECT FRONT PASSENGER SIDE JAM PROTECTION PULSE SWITCH
NG: REPLACE FRONT PASSENGER SIDE POWER WINDOW MOTOR
OK: GO TO NEXT STEP
- CHECK HARNESS AND CONNECTOR (JAM PROTECTION PULSE SWITCH - PASSENGER DOOR ECU)
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE