How To Proceed With Troubleshooting

HINT:

Troubleshoot in accordance with the procedures on the following instructions.

1. VEHICLE BROUGHT TO WORKSHOP 
2. DTC CHECK 
   1. Check for DTCs and make a note of the code that is output (See DTC CHECK / CLEAR  ).
   2. Delete the DTC.
   3. Check if the DTC is output once again when the problem symptom is simulated based on the noted code.
      1. When no code is output (symptom check and simulation are possible), proceed to A.
      2. When a code is output, proceed to B.

   B:  Go to step  4

   A: Go to next step. 

3. PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM 
   1. Terminals of ECU (See TERMINALS OF ECU  )
4. ADJUST, REPAIR OR REPLACE 

   NEXT: END