Combination Meter: Installation

INSTALL COMBINATION METER ASSEMBLY
1. Connect the connectors.
2. Install the combination meter assembly with the 4 screws.
  
  Fig 1: Identifying Combination Meter Assembly With Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
1. Install the instrument cluster finish panel sub-assembly with the 4 clips.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization.
  NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.
  
  Fig 2: Identifying Instrument Cluster Finish Panel Sub-Assembly With Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002