Data List / Active Test

HINT:

Using the intelligent tester's DATA LIST allows the status of a switch, sensor, actuator and other items to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch on.
3. Read the DATA LIST.

   D_SEAT (Position control ECU and switch assembly) 

   DATA LIST
   
   

   Tester Display	Measurement Item/Range	Normal Condition
   RECLIN SW REAR	Reclining switch signal (Rearward)/ ON or OFF	ON: Reclining switch (Rearward) is ON OFF: Reclining switch (Rearward) is OFF
   RECLIN SW FRONT	Reclining switch signal (Forward)/ ON or OFF	ON: Reclining switch (Forward) is ON OFF: Reclining switch (Forward) is OFF
   F VTCL SW DOWN	Front vertical switch signal (Downward)/ ON or OFF	ON: Front vertical switch (Downward) is ON OFF: Front vertical switch (Downward) is OFF
   F VTCL SW UP	Front vertical switch signal (Upward)/ ON or OFF	ON: Front vertical switch (Upward) is ON OFF: Front vertical switch (Upward) is OFF
   LIFTER SW DOWN	Lifter switch signal (Downward)/ ON or OFF	ON: Lifter switch (Downward) is ON OFF: Lifter switch (Downward) is OFF
   LIFTER SW UP	Lifter switch signal (Upward)/ ON or OFF	ON: Lifter switch (Upward) is ON OFF: Lifter switch (Upward) is OFF
   SLIDE SW REAR	Sliding switch signal (Rearward)/ ON or OFF	ON: Sliding switch (Rearward) is ON OFF: Sliding switch (Rearward) is OFF
   SLIDE SW FRONT	Sliding switch signal (Forward)/ ON or OFF	ON: Sliding switch (Forward) is ON OFF: Sliding switch (Forward) is OFF
   POWER VOLTAGE	Power supply for position control ECU and switch assembly/ MIN: 0 V, MAX: 19.89 V	Within range from 11 to 14 V
   IGSW	Ignition switch position/ ON or OFF	ON: Ignition switch is ON OFF: Ignition switch is OFF
   KEY UNLOCK SW	Key unlock warning switch signal/ ON or OFF	ON: Key is in ignition key cylinder OFF: Key is not in ignition key cylinder
   D-DOOR WARN SW	Door courtesy light switch signal/ ON or OFF	ON: Driver side door is open OFF: Driver side door is closed
   PNPSW	Shift lever position P signal/ ON or OFF	ON: Shift lever in P position OFF: Shift lever in any position except P
   M2SW	Seat memory M2 switch signal/ ON or OFF	ON: Seat memory M2 switch is ON OFF: Seat memory M2 switch is OFF
   M1SW	Seat memory M1 switch signal/ ON or OFF	ON: Seat memory M1 switch is ON OFF: Seat memory M1 switch is OFF
   SET SW	Seat memory set switch signal/ ON or OFF	ON: Seat memory set switch is ON OFF: Seat memory set switch is OFF
   SLIDE POS	Seat sliding position/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   RECLIN POS	Seatback position/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   F VTCL POS	Seat front vertical position/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   LIFTER POS	Seat lifter position/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   MEM M1 SW	Driving position memorized with seat memory switch M1/ MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   MEM M2 SW	Driving position memorized with seat memory switch M2/ MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   SEAT MEM M1	Seat position memorized with seat memory switch M1/ MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   SEAT MEM M2	Seat position memorized with seat memory switch M2/ MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   D-MIRR MEM 1	Driver side mirror position memorized with seat memory switch M1/ MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   D-MIRR MEM 2	Driver side mirror position memorized with seat memory switch M2/ MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   P-MIRR MEM 1	Front passenger side mirror position memorized with seat memory switch M1/ MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   P-MIRR MEM 2	Front passenger side mirror position memorized with seat memory switch M2/ MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   SLIDE MEM POS 1	Seat sliding position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   RECLN MEM POS 1	Seatback position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   F VTCL MEM POS 1	Front vertical position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   LIFTER MEM POS 1	Lifter position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   SLIDE MEM POS 2	Seat sliding position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   RECLN MEM POS 2	Seatback position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   F VTCL MEM POS 2	Front vertical position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   LIFTER MEM POS 2	Lifter position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096	Within range from -4096 to 4096
   D-MIRR MEM POS 1	Driver side mirror position memorized with seat memory switch M1/ MIN: 0, MAX: 65535	Within range from 0 to 65535
   P-MIRR MEM POS 1	Front passenger side mirror position memorized with seat memory switch M1/ MIN: 0, MAX: 65535	Within range from 0 to 65535
   D-MIRR MEM POS 2	Driver side mirror position memorized with seat memory switch M2/ MIN: 0, MAX: 65535	Within range from 0 to 65535
   P-MIRR MEM POS 2	Front passenger side mirror position memorized with seat memory switch M2/ MIN: 0, MAX: 65535	Within range from 0 to 65535

HINT:

Using the intelligent tester's ACTIVE TEST allows the relay, VSV, actuator, and other items to be operated without removing any parts. Reading the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch on.
3. Perform the ACTIVE TEST by following the directions on the tester screen.

   D_SEAT (Position control ECU and switch assembly) 

   DATA LIST
   
   

   Tester Display	Test Part	Control Range
   RECLINING	Test detail: reclining operation Vehicle condition: stopped	FRONT/REAR
   F VERTICAL	Test detail: front vertical operation Vehicle condition: stopped	UP/DOWN
   LIFTER	Test detail: lifter operation Vehicle condition: stopped	UP/DOWN
   SLIDE	Test detail: sliding operation Vehicle condition: stopped	FRONT/REAR