FixVault
Home › Toyota › 2007 › Sienna LE, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation › Accelerator Pedal Rod › Removal

Accelerator Pedal Rod: Removal

  1. REMOVE ACCELERATOR PEDAL ROD 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 nuts and accelerator pedal rod.
      Fig 1: Locating Nuts On Accelerator Pedal Rod
      G05136385Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault