FixVault
Home › Toyota › 2007 › Sienna LE, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation › Mass Air Flow Meter › Installation

Mass Air Flow Meter: Installation

  1. REMOVE MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.
    2. Connect the mass air flow meter connector.
      Fig 1: Locating Screws On Mass Air Flow Meter
      G05136389Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault