FixVault
Home › Toyota › 2007 › Tundra Base, 5.7 V, 4WD › Repair and Diagnosis › Engine Performance › System › Engine Control System (3UR-FE) - System Testing, Removal & Installation › Camshaft Position Sensor › Installation

Camshaft Position Sensor: Installation

  1. INSTALL CAMSHAFT POSITION SENSOR 
    1. Install the sensor with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    2. Connect the sensor connector.
  2. INSTALL V - BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
    Fig 1: Identifying Camshaft Position Sensor
    G05150034Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault