Throttle Body: Installation

INSTALL THROTTLE BODY ASSEMBLY
1. Install the 2 water by-pass hoses to the throttle body.
2. Install a new gasket to the intake air surge tank.
  HINT:
  
  Align the protrusion of the gasket with the groove of the intake air surge tank.
  
  Fig 1: Identifying Intake Air Surge Tank
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the throttle body with the 4 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 2: Locating Throttle Body With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the throttle position sensor and control motor connector.
5. Connect the 2 water by-pass hoses.
  
  Fig 3: Locating Water By-Pass Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADD ENGINE COOLANT (See REPLACEMENT )
INSTALL AIR CLEANER HOSE ASSEMBLY (See INSTALLATION )
INSPECT FOR ENGINE COOLANT LEAK (See ON-VEHICLE INSPECTION )
INSTALL V - BANK COVER SUB-ASSEMBLY (See INSTALLATION )