Accelerator Pedal: Installation

INSTALL ACCELERATOR PEDAL ROD ASSEMBLY
NOTE:
- Avoid physical shocks to the accelerator pedal rod assembly.
- Do not disassemble the accelerator pedal rod assembly.
1. Install the accelerator pedal rod with the 2 nuts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
2. Connect the accelerator pedal position sensor connector.
  
  Fig 1: Locating Accelerator Pedal Position Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002