Engine Coolant Temperature Sensor: Installation

INSTALL ENGINE COOLANT TEMPERATURE SENSOR
1. Install a new gasket to the sensor.
2. Install the sensor.
  Torque: 20 N*m (200 kgf*cm, 14 ft.*lbf)
3. Connect the sensor connector.
Fig 1: Locating Engine Coolant Temperature Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADD ENGINE COOLANT (See REPLACEMENT )
INSPECT FOR COOLANT LEAK (See ON-VEHICLE INSPECTION )
INSTALL V - BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL NO. 1 ENGINE UNDER COVER (See REPLACEMENT )