Removal and Installation of BCM: Installation
WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
NOTE:
- When replacing BCM, it must be configured. Refer to "CONFIGURATION ".
- When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to " NATS (NISSAN ANTI-THEFT SYSTEM) " .
- When replacing BCM, if new BCM does not come with keyfobs attached, all existing keyfobs must be reregistered.