Crankshaft Position Sensor: Removal

REMOVE GENERATOR ASSEMBLY (See REMOVAL )
REMOVE ENGINE UNDER COVER ASSEMBLY REAR
1. Remove the 4 bolts and the engine under cover assembly rear.
SEPARATE COOLER COMPRESSOR ASSEMBLY
1. Remove the bolt and separate the suction hose sub-assembly.
  
  Fig 1: Identifying Suction Hose Sub-Assembly Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the cooler compressor assembly connector.
3. Remove the 4 bolts and separate cooler compressor assembly from the V-ribbed belt tensioner assembly.
REMOVE CRANKSHAFT POSITION SENSOR
1. Disconnect the crankshaft position sensor connector.
2. Remove the bolt and the crankshaft position sensor.
  
  Fig 2: Identifying Crankshaft Position Sensor Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002