Front Speed Sensor: Installation

1. Using a hexagon wrench (5 mm), install the front speed sensor with the bolt to the steering knuckle.

   SST 99999-60011 

   Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf) 

   NOTE: Make sure the sensor tip is clean.
   Fig 1: Identifying Front Speed Sensor Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the front speed sensor connector.
   Fig 2: Identifying Front Speed Sensor Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 112 N*m (1137 kgf*cm, 82 ft.*lbf) 

HINT:

Check the speed sensor signal (See TEST MODE PROCEDURE  ).