Rear Speed Sensor: Installation

INSTALL REAR SPEED SENSOR LH
1. Install the rear speed sensor to the axle hub with the nut.
  Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf)
  
  NOTE: Make sure the sensor tip is clean.
  
  Fig 1: Identifying Rear Speed Sensor Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the rear speed sensor connector.
  
  Fig 2: Identifying Rear Speed Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR WHEEL
Torque: 112 N*m (1137 kgf*cm, 82 ft.*lbf)
CHECK SPEED SENSOR SIGNAL
HINT:

Check the speed sensor signal (see TEST MODE PROCEDURE ).