FixVault
Home › Toyota › 2008 › Avalon XLS › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control System › Dynamic Laser Cruise Control System › DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Power train / Laser Cruise / Trouble Codes.
    5. Check the details of the DTC(s) (See DIAGNOSTIC TROUBLE CODE CHART  ).
  2. DTC CLEAR 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Power train / Laser Cruise / Trouble Codes.
    5. Clear the DTCs.
About FixVault