FixVault
Home › Toyota › 2008 › Camry Base, Automatic › Repair and Diagnosis › Engine Performance › Ignition System › Engine Ignition System (2AZ-FE) › Ignition Coil › Removal

Ignition Coil: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE NO. 1 ENGINE COVER  (See REMOVAL )
  3. REMOVE IGNITION COIL ASSEMBLY 
    1. Disconnect the 4 ignition coil connectors.
    2. Remove the 4 bolts and 4 ignition coils.
      Fig 1: Locating Ignition Coils
      G04975482Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault