FixVault
Home › Toyota › 2008 › Camry Base, Standard › Repair and Diagnosis › Engine Performance › Engine Control System (2AZ-FE) (Except Hybrid) › Engine Coolant Temperature Sensor › Removal

Engine Coolant Temperature Sensor: Removal

  1. DRAIN ENGINE COOLANT  (See ON-VEHICLE INSPECTION )
  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE AIR CLEANER INLET ASSEMBLY  (See REMOVAL )
  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See  REMOVAL   ) 
  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
    2. Using SST, remove the engine coolant temperature sensor and gasket.

      SST 09817-33190 

      Fig 1: Removing Engine Coolant Temperature Sensor
      G04973365Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault