Accelerator Pedal Rod: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL ACCELERATOR PEDAL ROD
NOTE:
- Avoid physical shock to the accelerator pedal assembly.
- Do not disassemble the accelerator pedal assembly.
1. Install the accelerator pedal rod with the 2 bolts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Fig 1: Locating Accelerator Pedal Rod Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the accelerator pedal position sensor connector.