How To Proceed With Troubleshooting

HINT:

*: Use Techstream.

1. Vehicle Brought to Workshop 
2. Customer Problem Analysis 
3. Check and Clear DTCs and Freeze Frame Data* 

   HINT:

   See FREEZE FRAME DATA 

4. Problem Symptom Confirmation 

   Symptom does not occur: Go to step 5 

   Symptom occurs:  Go to step  6

5. Symptom Simulation 

   HINT:

   See ELECTRONIC CIRCUIT INSPECTION PROCEDURE

6. DTC Check* 

   HINT:

   See DTC CHECK / CLEAR 

   There is no output: Go to step 7 

   There is output:  Go to step  8

7. Problem Symptoms Table 

   HINT:

   See PROBLEM SYMPTOMS TABLE 

   Check for fluid leakage and Go to step  10

8. DTC Chart 

   HINT:

   See DIAGNOSTIC TROUBLE CODE CHART 

9. Circuit Inspection* 

   HINT:

   When 2 or more DTCs are detected, perform circuit inspection one by one until the problem is identified.

10. Identification of Problem 
11. Repair 
12. Confirmation Test* 

    End