FixVault
Home › Toyota › 2008 › Camry Solara SLE, 2D Convertible › Repair and Diagnosis › Engine Performance › Engine Control System (3MZ-FE) › VVT Sensor › Installation

VVT Sensor: Installation

  1. INSTALL VVT SENSOR 
    1. Apply a light coat of engine oil to the O-ring on the sensor.
    2. Install the sensor with the bolt.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

    3. Connect the sensor connector.
  2. INSTALL AIR CLEANER ASSEMBLY 

    HINT:

    See INSTALLATION

  3. INSTALL AIR CLEANER INLET ASSEMBLY 
  4. CHECK CONNECTION OF VACUUM HOSE 
About FixVault