Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

CHECK WHETHER DTC OUTPUT RECURS (DTC P0607)

Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position and turn the tester on.
Clear the DTC (See DTC CHECK/CLEAR ).
Turn the ignition switch off and turn the tester off.
Disconnect the battery negative terminal and wait for 1 minute.
Connect the battery negative terminal.
Turn the ignition switch to the ON position and turn the tester on.
Select the following menu items: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES.

Read the DTCs.

Result

DTC RESULT REFERENCE

Display (DTC output)	Proceed to
P0607	A
No output	B

B: CHECK FOR INTERMITTENT PROBLEMS

A: REPLACE ECM