FixVault

Lighting System: Inspection

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY 
    1. Check the courtesy light switch.
      1. Measure the resistance according to the value(s) in the table below.

        Resistance 

        RESISTANCE REFERENCE CHART

        Tester connection Condition Specified resistance
        2 - Body ground Back door is closed 10 kΩ or higher
        2 - Body ground Back door is open Below 1 Ω
        Fig 1: Identifying Luggage Compartment Door Lock Connector Terminals
        G05131926Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT FRONT DOOR W/MOTOR LOCK ASSEMBLY LH 
    1. Measure the resistance according to the value(s) in the table below.

      Resistance 

      RESISTANCE REFERENCE CHART

      Tester connection Door operation Specified condition
      7 - 8 Driver's side door is unlocked Below 1 Ω
      7 - 8 Driver's side door is locked 10 kΩ or higher
      Fig 2: Identifying Front Door W/Motor Lock Connector Terminals (LH)
      G05131927Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT FRONT DOOR W/MOTOR LOCK ASSEMBLY RH 
    1. Measure the resistance according to the value(s) in the table below.

      Resistance 

      RESISTANCE REFERENCE CHART

      Tester connection Door operation Specified condition
      7 - 8 Passenger's side door is unlocked Below 1 Ω
      7 - 8 Passenger's side door is locked 10 kΩ or higher
      Fig 3: Identifying Front Door W/Motor Lock Connector Terminals (RH)
      G05131928Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002