Rear Combination Light Assembly: Disassembly

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR COMBINATION LIGHT GASKET
1. Remove the rear combination light gasket.
  NOTE:
  - Be sure to remove all traces of the old gasket from the body.
  - Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.
    
    Fig 1: Removing Rear Combination Light Gasket
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR COMBINATION LIGHT BULB
1. Turn the rear combination light bulb and the rear combination light socket and wire in the direction indicated by the arrow and remove them as a unit.
2. Remove the rear combination light bulb from the rear combination light socket and wire.
  
  Fig 2: Removing Rear Combination Light Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE
1. Disconnect the connector.
2. Disengage the claw and remove the rear combination light socket and wire.
  
  Fig 3: Locating Rear Combination Light Socket And Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002