Rear Combination Light Assembly: Reassembly

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE
1. Connect the connector.
2. Engage the claw and install the rear combination light socket and wire.
INSTALL REAR COMBINATION LIGHT BULB
1. Install the rear combination light bulb to the rear combination light socket and wire.
  
  Fig 1: Locating Rear Combination Light Socket And Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Turn the rear combination light bulb and rear combination light socket and wire in the direction indicated by the arrow and install them as a unit.
  
  Fig 2: Turning Rear Combination Light Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR COMBINATION LIGHT GASKET
1. Install a new rear combination light gasket.
  NOTE:
  - Be sure to remove all traces of the old gasket from the body.
  - Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.
    
    Fig 3: Identifying Rear Combination Light Gasket
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002