FixVault
Home › Toyota › 2008 › Corolla LE, Standard › Repair and Diagnosis › External Pages › Different car › Section 111 (Engine Control System (3MZ-FE)) › VVT Sensor › Removal

VVT Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See SPECIFIED TORQUE FOR STANDARD BOLTS ).

  1. REMOVE AIR CLEANER INLET ASSEMBLY 
  2. REMOVE AIR CLEANER ASSEMBLY 
  3. REMOVE VVT SENSOR 
    1. Disconnect the sensor connector.
      2. Fig 1: Identifying VVT Sensor And Bolt
      G05587383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
About FixVault