Diagnosis System

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

CHECK THE DLC3

Measure the resistance according to the value(s) in the table below.

Standard resistance

RESISTANCE REFERENCE CHART

Tester connection	Condition	Specified condition
4 - Body ground	Always	Below 1 Ω

If the resistance is not as specified, inspect the TC terminal circuit (See TC and CG Terminal Circuit ).

Fig 1: Identifying DLC3 Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Measure the voltage according to the value(s) in the table below.

Standard voltage

VOLTAGE CHART

Tester connection	Condition	Specified condition
13 - Body ground	Ignition Switch ON	10 to 14 V

If the resistance is not as specified, inspect the TC terminal circuit (See TC and CG Terminal Circuit ).

Fig 2: Identifying TC Terminal Circuit