Rear Combination Light Assembly: Removal

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR COMBINATION LIGHT ASSEMBLY
1. Disconnect the connector and 2 clamps.
  
  Fig 1: Locating Connector And Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 4 nuts.
  
  Fig 2: Locating Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disengage the pin and remove the rear combination light assembly.
  
  Fig 3: Identifying Rear Combination Light Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002