FixVault
Home › Toyota › 2008 › Corolla S, Automatic › Repair and Diagnosis › Engine Performance › Engine Control System (1ZZ-FE) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    1. Disconnect the accelerator position sensor connector [A].
    2. Remove the 2 bolts [B], then remove the accelerator pedal.
      Fig 1: Identifying Accelerator Position Sensor Connector And Bolts
      G05192750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault