FixVault
Home › Toyota › 2008 › FJ Cruiser 4WD, Part Time › Repair and Diagnosis (Single Page) › Accessories & Equipment › Cruise Control Systems › Cruise Control System › Cruise Control System › DTC Check/Clear

DTC Check/Clear

  1. DTC CHECK 
    1. Connect a Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester ON.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect a Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester ON.
    4. Enter the following menus: Select: Powertrain / Cruise Control / Trouble Codes.
    5. Erase the DTCs.
About FixVault