FixVault
Home › Toyota › 2008 › FJ Cruiser 4WD, Part Time › Repair and Diagnosis › Electrical › Starter › Starting System › Ignition Switch › Removal

Ignition Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE IGNITION SWITCH ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 2 screws, then remove the ignition switch.
      Fig 1: Identifying Ignition Switch Screws
      G05109970Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault