FixVault
Home › Toyota › 2008 › Highlander Base, AWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 41 (Cruise Control System (Hybrid)) › Cruise Control System › DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different variant/trim than selected.
  1. DTC CHECK 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Select the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Check the details of the DTC(s) (See DIAGNOSTIC TROUBLE CODE CHART ).
  2. DTC CLEAR 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Select the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Clear the DTCs.
About FixVault