How To Proceed With Troubleshooting

HINT:

VEHICLE BROUGHT TO WORKSHOP
INSPECT BATTERY VOLTAGE
Standard voltage: 11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
CHECK AND CLEAR DTCS*

PROBLEM SYMPTOM CONFIRMATION

Result

RESULT TABLE

Result	Proceed to
Symptom does not occur	A
Symptom occurs	B

B: GO TO STEP 6

A: Go to next step

SYMPTOM SIMULATION
CHECK CAN COMMUNICATION SYSTEM *
HINT:

Check that there are no problems in the CAN communication system before troubleshooting the steering lock system.

DTC CHECK*

Check for DTCs (See DTC CHECK/CLEAR ).

Result

RESULT TABLE

Result	Proceed to
DTC is output.	A
DTC is not output.	B

A: GO TO STEP 9

B: Go to next step

PROBLEM SYMPTOMS TABLE

Result

RESULT TABLE

Result	Proceed to
Fault is not listed in problem symptoms table	A
Fault is listed in problem symptoms table	B

B: Go TO STEP 10

A: Go to next step