Back Window Lock: Inspection

INSPECT BACK WINDOW LOCK ASSEMBLY

Check operation of the back window lock assembly.

Apply the battery voltage to the window lock motor and check the operation of the window lock motor.

OK:

MEASUREMENT CONDITION AND SPECIFIED CONDITION TABLE

Measurement Condition	Specified Condition
Battery positive (+) → 3 Battery negative (-) → 4	Unlock

If the result is not as specified, replace the back window lock assembly.

Fig 1: Identifying Back Window Lock Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Check operation of the back window courtesy switch.

Measure the resistance according to the value(s) in the table below.

Standard resistance

RESISTANCE SPECIFICATION TABLE

Tester Connection	Condition	Specified Condition
1 - 2	Lock	10 kΩ or higher
1 - 2	Unlock	Below 1 Ω

If the result is not as specified, replace the back window lock assembly.