FixVault
Home › Toyota › 2008 › Highlander Base, FWD › Repair and Diagnosis › Body & Frame › Windows › Windshield/Window Glass (Except Hybrid) › Back Window Lock › Installation

Back Window Lock: Installation

  1. PRECAUTION  (See INSTALLATION )
    Fig 1: Identifying Back Window Lock Connector Terminals
    G05421277Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BACK WINDOW LOCK ASSEMBLY 
    1. Engage the clip and install the back window lock assembly.
      Fig 2: Identifying Back Window Lock Clip
      G05421292Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 3 bolts.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

      Fig 3: Identifying Back Window Lock Bolts
      G05421291Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Engage the clamp.
    4. Connect the connector.
      Fig 4: Identifying Back Window Lock Connector
      G05421290Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL REAR WIPER MOTOR ASSEMBLY  (See INSTALLATION )
  4. INSTALL REAR WIPER LINK PIVOT  (See INSTALLATION )
  5. INSTALL REAR WIPER LINK CAP  (See INSTALLATION )
  6. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY  (See INSTALLATION )
  7. INSTALL REAR WIPER ARM HEAD CAP  (See INSTALLATION )
  8. INSTALL REAR WIPER SHAFT COVER  (See INSTALLATION )
  9. INSTALL BACK DOOR TRIM PANEL ASSEMBLY  (See REASSEMBLY )
  10. INSTALL ASSIST STRAP ASSEMBLY  (See REASSEMBLY )
  11. INSTALL ASSIST STRAP HOLE COVER  (See REASSEMBLY )
  12. INSTALL BACK DOOR LOCK COVER  (See REASSEMBLY )
  13. INSTALL BACK DOOR TRIM COVER LH (w/o Power Back Door)  (See REASSEMBLY )
  14. INSTALL BACK DOOR TRIM COVER LH (w/ Power Back Door)  (See REASSEMBLY )
  15. CONNECT POWER BACK DOOR ROD (w/ Power Back Door)  (See REASSEMBLY )
  16. INSTALL BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)  (See REASSEMBLY )
  17. INSTALL BACK DOOR TRIM COVER RH  (See REASSEMBLY )
  18. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY  (See REASSEMBLY )
About FixVault