Meter / Gauge System: Initialization

OIL MAINTENANCE INFORMATION MODE RESET OPERATION
NOTE:
- When "Oil Maintenance Reqd" or "Oil Maintenance Reqd Soon" is displayed, change the engine oil and perform this procedure.
- After the engine oil is changed, perform this procedure so that "Oil Maintenance Reqd" or "Oil Maintenance Reqd Soon" does not display.
HINT:
- The oil change maintenance system displays "Oil Maintenance Reqd" or "Oil Maintenance Reqd Soon" in the multi-information display to inform the driver that it is time to change the oil based on the distance driven.
- The ODO/TRIP switch is in the light control rheostat.
1. Turn the engine switch on (IG), and use the ODO/TRIP switch to change the screen display to TRIP A.
2. Turn the engine switch off.
3. While holding in the ODO/TRIP switch, turn the engine switch on (IG).
  
  Fig 1: Identifying ODO/TRIP Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. After a 5 second count, reset will end.
  NOTE:
  - If the engine switch is turned off during the reset operation, reset mode will be canceled.
  - If the ODO/TRIP switch is released during the reset operation, reset mode will be canceled.
    
    Fig 2: Diagnostic Flow Chart
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  1. RESET FLOWCHART
    
    Fig 3: Reset Flowchart (1 Of 2)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Fig 4: Reset Flowchart (2 Of 2)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002