Park / Neutral Position Switch: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
1. Remove the clip and pin, and disconnect the shifting rod from the transmission control shaft lever RH.
REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
1. Disconnect the switch connector.
  
  Fig 1: Locating Pin
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the nut, spring washer and transmission control shaft lever RH.
3. Remove the collar and transmission control rod bush from the transmission control shaft lever RH.
  
  Fig 2: Locating Transmission Control Shaft Lever RH Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using a screwdriver, bend the tabs of the lock washer.
  
  Fig 3: Using Screwdriver Bending Tabs Of Lock Washer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the lock nut and lock washer.
  
  Fig 4: Locating Lock Nut And Lock Washer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Remove the bolt and switch.
  
  Fig 5: Locating Switch Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002