FixVault
Home › Toyota › 2008 › Land Cruiser › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Shift Lever › Removal

Shift Lever: Removal

  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (w/ Cool Box)  (See REPLACEMENT )
  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION  (See REMOVAL )
  3. REMOVE LOWER INSTRUMENT PANEL PAD SUBASSEMBLY LH  (See REMOVAL )
  4. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL PAD SUBASSEMBLY RH  (See REMOVAL )
  6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE REAR UPPER CONSOLE PANEL SUBASSEMBLY  (See REMOVAL )
  8. REMOVE CONSOLE CUP HOLDER BOX SUBASSEMBLY  (See REMOVAL )
  9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  10. REMOVE NO. 1 COOLER COVER (w/ Cool Box)  (See REMOVAL )
  11. REMOVE CONSOLE REAR END PANEL SUBASSEMBLY  (See DISASSEMBLY )
  12. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)  (See DISASSEMBLY )
  13. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/ o Cool Box)  (See DISASSEMBLY )
  14. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY 
    1. Move the shift lever to N.
    2. Remove the nut and disconnect the shifting rod from the connecting rod swivel.
      Fig 1: Locating Shifting Rod Nut
      G05629177Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 
    1. Disconnect the 2 connectors.
    2. Remove the 4 bolts and floor shift.
About FixVault