FixVault
Home › Toyota › 2008 › Matrix Base, Automatic › Repair and Diagnosis › Suspension › Wheel Alignment › Suspension System › Front Lower Ball Joint › Removal

Front Lower Ball Joint: Removal

  1. REMOVE FRONT WHEEL 
  2. REMOVE FRONT AXLE HUB LH NUT SST 09930-00010 
  3. DISCONNECT SPEED SENSOR FRONT LH (w/ ABS) 
  4. SEPARATE TIE ROD END SUB-ASSEMBLY LH 

    SST 09628-62011 

  5. SEPARATE FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO. 1 LH (See  REMOVAL   ) 
  6. SEPARATE FRONT AXLE ASSEMBLY LH (See  REMOVAL  ) 
  7. REMOVE LOWER BALL JOINT ASSEMBLY FRONT LH 
    1. Remove the cotter pin and castle nut.
    2. Using SST, remove the lower ball joint assembly from the steering knuckle LH.

      SST 09628-62011 

About FixVault