FixVault
Home › Toyota › 2008 › RAV4 Base, 2.4 D, AWD › Repair and Diagnosis › Electrical › Gauges › Meter › Combination Meter › Installation

Combination Meter: Installation

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
    2. Attach the 2 clips to install the combination meter.
    3. Install the 2 screws.
      Fig 1: Attaching Clips
      G05586227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 
    1. Attach the 4 clips and 6 claws to install the instrument cluster finish panel.
      2. Fig 2: Attaching Clips
      G05586225Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
About FixVault