FixVault
Home › Toyota › 2008 › RAV4 Base, 2.4 D, FWD › Repair and Diagnosis › Body & Frame › Windows › Windshield/Window Glass › Windshield Deicer Relay › On-Vehicle Inspection

On-Vehicle Inspection

  1. REMOVE WINDSHIELD DEICER RELAY (Marking: DEICER) 
    1. Remove the defogger relay from the engine room No. 2 relay block.
  2. INSPECT WINDSHIELD DEICER RELAY 
    1. Measure the resistance of the relay.

      Standard resistance 

      STANDARD RESISTANCE SPECIFICATION

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      Below 1 Ω
      (when battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the relay.

      2. Fig 1: Inspecting Defogger Relay
      G04978973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL WINDSHIELD DEICER RELAY 
About FixVault