FixVault
Home › Toyota › 2008 › Sienna CE › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control System › Cruise Control System › DTC Check / Clear

DTC Check / Clear

  1. DTC CHECK 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Check the details of the DTC(s). (See DIAGNOSTIC TROUBLE CODE CHART )
  2. DTC CLEAR 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Clear the DTC(s).
About FixVault