FixVault
Home › Toyota › 2008 › Sienna CE › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control System › Dynamic Laser Cruise Control System › DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Laser Control / Trouble Codes
    5. Check the details of the DTC(s). (See DIAGNOSTIC TROUBLE CODE CHART )
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Laser Control / Trouble Codes
    5. Clear the DTCs.
About FixVault